| |
| |
|
Axis
Stroke (mm/in)
|
|
Overall
Dimension (MM)
|
| |
Vertical
"Y"
|
Strip
"X"
|
Traverse
"Z"
|
Flip
"C" |
"D"
|
"E"
|
"F"
|
"G"
|
"H"
|
|
|
800/31.5
|
200/7.9
|
1800/70.9 |
90°
Pneau.
|
860 |
1520 |
1350 |
2195 |
2615 |
|
|
1300/51.2
|
500/19.7
|
1800/70.9 |
90°
Pneau. |
930 |
1410 |
2390 |
2195 |
2615 |
| Working
Air Pressure: |
|
| Power
Source: |
|
Pneumatic/Electric
Drive:
208-240VAC single
phase, 15A
|
AC Servomotor Drive:
208-240VAC three phase, 20a
|
|
| Controller: |
|
Omron
CQM1 or GE Fanuc 9030 Series PLC Standard
|
|
|
Driving
Method:
|
|
Pneumatic,
Electric AC Generator, or AC Servomotor
drives. As described above, or most combinations of any
of the above available as options
|
|
Standard Features
- 200 mm pneumatic (X) axis
strip stroke is adjustable from 50 to 200 mm over a 500
mm range
- 500 mm electric (X) axis
strip stroke with AC gearmotor and steel core tooth belt drive
- Single-stage 800
or 1000 mm stroke vertical (Y) axis is pneumatically driven
- Two-stage 1300
or 1500 mm stroke vertical (Y) axis is driven with an AC gearmotor and
speed multiplying tooth belts
- Proximity switches
signal slow down, intermediate stop and end-of-travel positions on all
electric axes; a frequency inverter handles the axis speed and profiling
requirements
- Traverse (Z) electric
axis with tooth belt drive, AC gearmotor, and heavy-duty aluminum base
plate
- 90º pneumatic (C)
flip axis assembly with End-of-Arm-Tool mounting plate and 16-pin
End-of-Arm-Tool tool plug, adjustable end position cushioning and sensors
- (C) axis can
be retrofitted for fixed or moveable platen parts removal
- Filter regulator
with lockout and dump valve
- Heavy-duty multi-pin
connectors
- (1) Gripper
circuit with 5/2 valve
- (1) Venturi type
vacuum generator with vacuum confirmation switch and quick plug-in
End-of-Arm-Tool connector
- SPI protocol compatible
interface, complete with 5m cable (32-pin termination on both ends)
- NEMA 12 floor mount
control cabinet
- Custom height intermediate
plate
- One button return-home/single
step operator control
- Operations manual,
recommended spare parts list, program hard copy, and electrical prints
Options
- "A" axis 90º or
180º rotation
- AC servomotor on
any/all axes
- AC servomotor programmable
operator interface
- Conveyor interface
package
- Encoders on AC
electric axes
- Hand-held axis
control pendant
- Hand-held programming
unit
- Independent axis
frequency inverter
- Non-standard "X",
"Y", and "Z" strokes
- Program step display
- Second "Y" axis
- Additional gripper
circuits
Due
to continual improvements, specifications are subject to change without
notice.
|
