| |
| |
|
Axis
Stroke (mm/in)
|
|
Overall
Dimension (MM)
|
| |
Vertical
"Y"
|
Strip
"X"
|
Traverse
"Z" |
Flip
"C" |
"D" |
"E" |
"F" |
"G" |
"H" |
|
M6-800/1600/3000
|
1600/63.0
|
800/31.5
|
3000/118.1 |
90°
Pneau.
|
1465 |
1850 |
1610 |
3995 |
4185 |
| Working
Air Pressure: |
|
| Power
Source: |
|
Pneumatic/Electric
Drive:
208-240VAC single
phase, 15A
|
AC Servomotor Drive:
208-240VAC three phase, 20A
|
|
| Controller: |
|
Omron
CQM1 or GE Fanuc 9030 Series PLC Standard
|
|
|
Driving
Method:
|
|
Pneumatic,
Electric AC Generator, or AC
Servomotor drives. As described above, or most combinations
of any of the above available as options
|
|
Standard Features
- 200 mm pneumatic (X) axis
strip stroke is adjustable from 50 to 200 mm
over a 500 mm range
- 500 mm
electric (X) axis strip stroke with AC gearmotor and steel core tooth
belt drive
- Single-stage
800 or 1000 mm stroke vertical (Y) axis is pneumatically driven
- Two-stage 1300
or 1500 mm stroke vertical (Y) axis is driven with an AC gearmotor
and speed multiplying tooth belts
- Proximity switches
signal slow down, intermediate stop and end-of-travel positions on
all electric axes; a frequency inverter handles the axis speed and
profiling requirements
- Traverse (Z)
electric axis with tooth belt drive, AC gearmotor, and heavy-duty
aluminum base plate
- 90º pneumatic
(C) flip axis assembly with End-of-Arm-Tool mounting plate and 16-pin
End-of-Arm-Tool plug, adjustable end position cushioning and sensors
- (C) axis
can be retrofitted for fixed or moveable platen parts removal
- Filter regulator
with lockout and dump valve
- Heavy-duty multi-pin
connectors
- (1) Gripper circuit
with 5/2 valve
- (1) Venturi type
vacuum generator with vacuum confirmation switch and quick plug-in
End-of-Arm-Tool connector
- SPI protocol
compatible interface, complete with 5m cable (32-pin termination on
both ends)
- NEMA 12 floor
mount control cabinet
- Custom height
intermediate plate
- One button return-home/single
step operator control
- Operations manual,
recommended spare parts list, program hard copy, and electrical prints
Options
- "A" axis 90º
or 180º rotation
- AC servomotor
on any/all axes
- AC servomotor
programmable operator interface
- Conveyor interface
package
- Encoders on AC
electric axes
- Hand-held axis
control pendant Hand-held programming unit
- Independent axis
frequency inverter
- Non-standard
"X", "Y", and "Z" strokes
- Program step
display
- Second "Y" axis
- Additional gripper
circuits
Due
to continual improvements, specifications are subject to change without
notice.
|
